于文浩

职称:讲师

邮箱:yuwenhao@sau.edu.cn

学术方向

固体动力技术研究(固体火箭发动机研发、高空点火特性、羽流特征信号、推进剂性能表征等);

燃烧控制技术研究(固体推进剂燃烧性能测试与分析、金属燃料点火与燃烧、发动机燃烧不稳定等);

组合动力技术研究(进气道设计与优化、燃烧室掺混策略、结构设计与性能测试、推力性能与调节等);


主讲课程

1、火箭发动机原理,本科生课程, 32学时

2、空气动力学基础,本科生课程, 48学时

3、专业课程设计(2),本科生课程, 3学时


学术成果

主持省部级项目1项,横向科研项目1项;发表SCI论文10余篇;参编低空经济领域团体标准1项。

部分代表性科研项目:

1.多氧化气氛环境下铝颗粒动态燃烧特性研究,辽宁省教育厅青年项目培育计划项目,3万,主持;

2.固体推进剂装药燃烧稳定性研究,北京理工大学,10万元,主持;

部分代表性论文:

[1] YANG H, ZOU H, SONG Z, YU W. Parametric Simulation Study of Liquid Film Cooling of Hydrocarbon Liquid Rocket Engine [J]. Aerospace, 2025. 12(3), 176.

[2] LIU M, YU W, LI S. Factors in Condensate Product Particle Size During Aluminized Propellant Combustion [J]. AIAA Journal, 2023, 61(8): 3393-403.

[3] LIU M, YU W, LI S. Effect of aluminum-based additives on the ignition performance of ammonium perchlorate-based composite solid propellants [J]. Acta Astronautica, 2023, 204: 321-30.

[4] YU W, LI S, LIU M, et al. Effect of oxidant concentration on the combustion characteristics of aluminum particle-laden flow [J]. Powder Technology, 2021, 389: 235-42.

[5] YU W, LI S, LIU M, et al. Experimental investigation of ignition and combustion characteristics of aluminum particle-laden flow [J]. Acta Astronautica, 2021, 185: 14-24.